SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series - Page 268

9
Inspection and maintenance
Inspection and maintenance work
Operating Instructions – MOVIMOT
®
flexible
268
5. CAUTION!Risk of injury due to sharp edges. Risk of cutting injuries. Use pro-
tective gloves for cleaning. Work may only be carried out by qualified personnel.
Clean the sealing surfaces of the connection box and the electronics cover care-
fully.
30561550987
6. Place the new gasket on the connection box and fix it in position with the retaining
cams. Doing so will be easier if you adhere to the sequence shown in the figure
below.
1.
2.
1.
3.
3.
2.
30561559819
29129451/EN – 12/2019