SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series - Page 308

11
Technical data and dimension sheets
Technical data
Operating Instructions – MOVIMOT
®
flexible
308
11.3.3 Derating factors
Derating depending on the ambient temperature
The following figure shows the I
N motor
reduction depending on the ambient temperature:
Ambient temperature
in °C
Motor current rms value
N
in % of I
40200-20
100
80
60
40
20
0
60
[1]
[2]
31311096843
[1] 3% I
N
per K at 40°C to 60°C
[2] 2.5% I
N
per K at 35°C to 60 °C
Only for MOVIMOT
®
flexible with an electronics cover 5.5A and option /B
(brake control)
Derating depending on the installation altitude
Observe the derating according to chapter "Mechanical installation" > "Setting up the
device" > "Derating depending on the installation altitude".
Notes
INFORMATION
Derating is based on typical operating conditions with a supply voltage of 24 V
(sensor supply, input voltage of STO input).
29129451/EN – 12/2019