SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series - Page 32

4
Mechanical installation
Installing the device
Operating Instructions – MOVIMOT
®
flexible
32
Installing the electronics cover
• Use only electronics covers that match the size.
• Be careful not to tilt the electronics cover when placing it on the connection box.
Design MMF1.
The following figure shows how to correctly place the electronics cover onto the con-
nection box:
30566967563
Design MMF3.
The following figure shows how to correctly place the electronics cover onto the con-
nection box:
30566976139
29129451/EN – 12/2019