SEW-Eurodrive MOVIMOT flexible MMF1 C/DBC Series - Page 85

5
Electrical installation
Plug connectors
Operating Instructions – MOVIMOT
®
flexible
85
M23 plug connector
CAUTION
Loss of the guaranteed degree of protection.
Potential damage to property.
• Remove the union nut from the M23 plug connector using 3Nm.
• Between plug connector and bushing is a gap of 2mm.
M23 plug connectors are available in the plug connector design "Straight".
Design MMF1.
[1]
3
2
X
[3]
2 mm
3 Nm
[2]
30568710027
[1] "Straight" design
[2] The tightening torque for the union nut is 3Nm.
You can order suitable tools from TE Connectivity - Intercontec products using
the following purchase order number:
• Torque wrench 3Nm, 1/4" external square driver: C1.020.00
• Spanner wrench 1/4" square socket, suitable to the 923/723 series with
SpeedTec equipment: C6.216.00
[3] There is a gap of 2mm between plug connector and socket
29129451/EN – 12/2019