Sharp AR-5726 - Page 48

AR-5726/5731 SIMULATION 6 - 20
Operation/procedure
Input the set value with the 10-key and press the [START] key.
Operation/procedure
Input the set value with the 10-key and press the [START] key.
Operation/procedure
Enter the set value with the 10-key, and press the [START] key.
Operation/procedure
Sets enable/disable of the gamma life correction function.
Operation/procedure
Input the set value with the 10-key and press the [START] key.
Operation/procedure
Input the set value with the 10-key and press the [START] key.
This setup varies in connection with SIM 26-6 (Destination setup).
26-37
Purpose Setting
Function
(Purpose)
Used to set whether the machine is stopped or not
when the developer counter life is expired.
Item Operation
Item Content Default
0STOP Stop
1
1 NON STOP Non stop
26-38
Purpose Setting
Function
(Purpose)
Used to set whether the machine is stopped or not
when the drum counter life is expired.
Item Operation
Item Content Default
0STOP Stop
1
1 NON STOP Non stop
26-50
Purpose Setting
Function
(Purpose)
Used to set ON/OFF of the black and white reversion
function.
Item Operation
Item Content Default
0ON Enable 1 (U.K.)
0 (Others)
1OFF Disable
26-56
Purpose Setting
Function (Purpose) Gamma life correction setting
Item Operation
Item Set value Default
1 AE (Japan)
0: Disable
1: Enable
0
2 AE (Ex Japan) 0
3Text 1
4 Text/Photo 1
5 Photo (Error diffusion) 1
6 Photo (Dither) 1
7 T/S AE (Japan) 0
8 T/S AE (Ex Japan) 0
9 T/S Text 1
10 T/S Text/Photo 1
26-57
Purpose Setting
Function (Purpose) Used to set the model code.
Item Operation
Item
1 AR-5726
2 AR-5731
26-60
Purpose Setting
Function
(Purpose)
Used to set enable/disable of the FAX mode key when
FAX is not installed. (When FAX is installed, the FAX
mode is enabled regardless of this setup.)
Item Operation
Item Content
Default
U.S.A, Canada,
U.K., Australia
Others
0ON
Effective (The message with
FAX uninstalled is displayed.) 0 1
1 OFF Disable (Error Beep)