Sharp AR-M550U - Screen Grid; MC Cleaner; Saw Teeth Plate

: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 88
4) Remove the main charger unit.
a-1. Screen grid
2) Remove the screen grid from the claw.
a-2. Saw teeth plate
1) Remove the blue screw.
2) Lifting one end up, slide off the saw blade holder.
a-3. MC cleaner
1) Remove the screen grid. (See “a-1. Screen grid” in this section)
2) Remove the saw teeth plate.(See “a-2. Saw teeth plate” in this sec-
tion)
3) Remove the MC cleaner.
1) Loosen the screw.
1
1