Sharp AR-M550U - Fusing Drive Section; Fusing Drive Unit; Fusing Motor

: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 134
(2) Maintenance and parts replacement
[Fusing drive section]
(Replacement parts)
a. Fusing drive unit
1) Remove the fusing unit. (See “a. Fusing unit” in the “6. Fusing sec-
tion”)
2) Remove the fusing motor. (See “b-1. Fusing motor” in this section)
3) Disconnect the connector and remove the harnesse clamp.
4) Remove the fusing drive unit.
∗ Remove the screw which was indicated with the arrow mark.
a-1. Paper exit motor 1
a-2. Paper exit motor 2
1) Remove the fusing unit. (See “a. Fusing unit” in the “6. Fusing sec-
tion”)
2) Remove the fusing drive unit. (See “b-1. Fusing motor” in this sec-
tion)
3) Disconnect the connector, and remove the fusing drive frame.
4) Remove the paper exit motor 1 (A) and the paper exit motor 2 (B).
b-1. Fusing motor
1) Remove the rear cabinet and the rear cabinet upper.
No. Unit Parts
a Fusing drive unit 1 Paper exit motor 1
2 Paper exit motor 2
b 1 Fusing motor
b-1
a-1
a-2
a
1
1
A
B
1