Sharp AR-M550U - Horizontal Paper Transport Clutch

: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 141
4) Remove the 1/2 paper feed drive frame lower. Remove the har-
ness clamp.
5) Disconnect the connector, and remove the vertical paper transport
motor.
a-2. Paper feed tray 3/4 paper transport clutch 2
1) Remove the 1/2 paper feed drive unit. (See “a. 1/2 paper feed
drive unit” in this section)
2) Remove the 1/2 paper feed drive frame lower. (See “a-1. Vertical
paper transport motor” in this section)
3) Disconnect the connector and remove the harness clamp, and
remove the paper feed tray 3/4 paper transport clutch 2.
4) Remove the E-ring, and remove the paper feed tray 3/4 paper
transport clutch 2.
1
a-3. Paper feed clutch (Paper feed tray 1)
1) Remove the 1/2 paper feed drive unit. (See “a. 1/2 paper feed
drive unit” in this section)
2) Remove the 1/2 paper feed drive frame lower. (See “a-1. Vertical
paper transport motor” in this section)
3) Disconnect the connector and remove the harness clamp, and
remove the paper feed clutch (paper feed tray 1) unit.
4) Remove the E-ring, and remove the paper feed clutch (paper feed
tray 1).
a-4. Horizontal paper transport clutch
1) Remove the 1/2 paper feed drive unit. (See “a. 1/2 paper feed
drive unit” in this section)
2) Remove the 1/2 paper feed drive frame lower. (See “a-1. Vertical
paper transport motor” in this section)
3) Disconnect the connector and remove the harness clamp, and
remove the horizontal paper transport clutch.
4) Remove the E-ring, and remove the horizontal paper transport
clutch.
1