AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 144
4) Disconnect the connector and remove the harness clamp. Remove
the 3/4 paper feed drive unit.
∗ Remove the screw which was indicated with the arrow mark.
a-1. Paper feed clutch (Paper feed tray 3)
1) Remove the 3/4 paper feed drive unit. (See “a. 3/4 paper feed drive
unit” in this section)
2) Remove the E-ring and remove the parts.
3) Remove the 3/4 drive frame lower.
4) Disconnect the connector, and remove the paper feed clutch unit.
5) Remove the E-ring, and remove the paper feed clutch.
a-2. Paper feed clutch (Paper feed tray 4)
1) Remove the 3/4 paper feed drive unit. (See “a. 3/4 paper feed
drive unit” in this section)
2) Remove the 3/4 drive frame lower. (See “a-1. Paper feed clutch
(Paper feed tray 3)” in this section)
3) Disconnect the connector, and remove the paper feed clutch unit.
4) Remove the E-ring, and remove the paper feed clutch.
To Next Page
Loading...
