Sharp AR-M550U - Mirror; Lens; Reflector; Scanner Dry Heater

: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 96
a-3. Mirror
a-4. Lens
a-5. Reflector
1) Remove the table glass. (See “a-1. Table glass” in this section)
2) Move the lamp unit.
3) Clean mirrors 2 and 3.
5) Remove the lens cover.
6) Cary out cleaning of the lens and CCD.
7) Cary out cleaning of the reflector.
a-6. Scanner dry heater
1) Remove the table glass. (See “a-1. Table glass” in this section)
4) Remove the harness clamp and the dark box.
NOTE: When attaching the dark box cover, check to insure that the
blade spring is in the original position.
1
2) Shift the lamp unit, and remove the dark box. (See “a-3. Mirror” in
this section)
3) Remove the dark box and remove the harness clamp, and remove
the scanner dry heater.
1