AR-M550/M620/M700 OTHER 12 - 14
C. Finisher (AR-F15/F16) paper jam judgment conditions
JAM code Content
JAM detection method
JAM judgment time
(Stacker: LTR horizontal size
Saddle: LTR vertical size)
JAM detection timer
start trigger
JAM judge detector
Common to 55/62, 70PPM MODELS
(Main unit paper exit speed:
Stacker: 800mm/s
Saddle: 420mm/s)
FES_N FINISHER entry port sensor
not-reached JAM
Main unit paper exit
command reception
The paper entry sensor is not turned
ON within the specified time.
500ms
FES_S FINISHER entry port
remaining JAM
Paper entry sensor
ON
The paper entry sensor is not turned
OFF within the specified time.
540ms
FINISHER buffer sensor not-
reached JAM
Paper entry senor
ON
The buffer sensor is not turned ON
within the specified time.
688ms
FINISHER buffer sensor
remaining JAM
Buffer sensor ON The buffer sensor is not turned OFF
within the specified time.
540ms
FINISHER paper exit sensor
not-reached JAM
Entry port sensor ON The paper exit sensor is not turned
ON within the specified time.
Straight path transport: 453ms
Buffer path transport: 815ms
FINISHER paper exit sensor
remaining JAM
Paper exit sensor ON The paper exit sensor is not turned
OFF within the specified time.
840ms
FFPS_N FINISHER saddle transport
path sensor not-reached JAM
Entry port sensor ON The saddle transport path sensor is
not turned ON within the specified
time.
914ms
FFPS_S FINISHER saddle transport
path sensor remaining JAM
Saddle transport path
sensor ON
The saddle transport path sensor is
not turned OFF within the specified
time.
996ms
FINISHER saddle paper exit
sensor not-reached JAM
Folding edge sensor
ON (Completion of
thrust operation)
The saddle transport sensor is not
turned ON though paper is
transported in the specified distance.
180mm (Twice as much as the
normal distance)
FINISHER saddle paper exit
sensor remaining JAM
Saddle paper exit
sensor ON
The saddle paper exit sensor is not
turned OFF though paper is
transported in the specified distance.
209.25mm (1.5 times as much as the
normal distance)
FEXIT_S FINISHER bundle exit
remaining JAM
Start of bundle exit to
the stack tray
The staple tray sensor is not turned
OFF within the specified time.
1000ms
FSTPL FINISHER Stacker staple
JAM
Start of stacker
stapling
When the staple HP sensor does not
sense ON within the specified time
from staple HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FINISHER saddle staple JAM Start of saddle
stapling
When the staple HP sensor does not
sense ON within the specified time
from stapler HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FPNCH FINISHER punch JAM Punch HP OFF after
starting punching
The punch HP sensor does not turn
ON within the specified time.
200ms
FDOP FINISHER door open JAM One of finisher doors
open
Finisher door open is detected in
finishing process.
---
To Next Page
Loading...
