: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 5
46 02 Copy exposure level adjustment (binary) ●●
09 Copy exposure level adjustment/individual setting (Text binary) ●●
10 Copy exposure level adjustment, individual setting (Text/Photo binary) ●●
11 Copy exposure level adjustment, individual setting (Photo binary) ●●
12 FAX exposure level adjustment (1 mode auto adjustment) ●●
13 FAX exposure level adjustment, individual setting (Normal text) ●●
14 FAX exposure level adjustment, individual setting (Fine) ●●
15 FAX exposure level adjustment, individual setting (Super Fine) ●●
16 FAX exposure level adjustment, individual setting (Ultra Fine) ●●
17 Shading reference value change (Gain adjustment) ●
18 ϒ change (Copier mode) ●
19 Exposure mode setting ●
20 OC/SPF exposure correction ●
21 Scanner exposure level adjustment (1 mode auto adjustment) ●
22 Scanner exposure level adjustment, individual setting (Normal text) ●
23 Scanner exposure level adjustment, individual setting (Fine) ●
24 Scanner exposure level adjustment, individual setting (Super Fine) ●
25 Scanner exposure level adjustment, individual setting (Ultra Fine) ●
27 ϒ change (Scanner mode) ●
31 Copy sharpness setting ●
39 FAX sharpness setting ●
45 FAX exposure level adjustment, individual setting (600dpi) ●●
48 01 Magnification ratio adjustment (by Input/Output) ●●
05 Motor speed adjustment ●
50 01 Copy lead edge adjustment (Document table) ●●●
02 Lead edge adjustment (Document table simple type) ●●●
05 Print lead edge adjustment ●●
06 Copy lead edge adjustment (SPF) ●●●
07 Copy lead edge adjustment (SPF simple type) ●●●
10 Print off-center adjustment ●●
12 Document off-center adjustment ●●
27 Document image loss setting (FAX send/scanner mode) ●
51 02 Resist amount adjustment ●●
53 06 SPF size width detection level adjustment ●
07 SPF size width detection adjustment value input ●
08 SPF scan position adjustment ●
55 01 Engine soft SW change and check ●
02 Scanner soft SW change and check ●
03 Controller soft SW change and check ●
56 01 Data transfer ●
60 01 ICU image DRAM read/write check ●
61 01 LSU operation check ●
02 Laser power setting (Copier) ●
03 Laser power setting (FAX) ●
04 Laser power setting (Printer) ●
62 01 Hard disk format ●
02 Hard disk read/write check ●
03 Hard disk read/write check (All areas) ●
06 HDD self diag ●
07 Self diag error log print ●
08 Hard disk format (Excluding the system area) ●
10 Job complete list delete ●
11 Document filing data delete ●
63 01 Shading check ●
02 Shading execution ●
07 White plate scan start position adjustment ●
64 01 Self print ●
65 01 Touch panel adjustment ●
02 Touch panel check ●
Main
code
Sub
code
Operation contents
Data save destination/Target
MFP Scanner Engine
To Next Page
Loading...
