AR-M550/M620/M700 ROM VERSION-UP METHOD 10 - 6
<Reference> How to use Fcopy.exe program
When transferring ROM program files by using Fcopy.exe program,
copy Fcopy.exe program and the ROM program files in the same
folder and boot MS-DOS. Then, open the above folder on MS-DOS,
and type "Fcopy file name"and transfer is performed. In the example
below, the SFU file is placed in C:\ROM folder, and it is transferred.
YES
NO
YES
NO
YES
NO
Booted normally?
Remove the Flash ROM
and replace it with a
spare.
Write the on-board files
collectively. (4.)
Result: OK?
Update completed
Write with the empty socket.
(6.)
Result: OK?
Update completed
If the Flash ROM itself is
defective, replace it with a
new one and try again.
YES
NO
Write the on-board files
collectively. (4.)
Result: OK?
Update completed
If the Flash ROM itself is
defective, replace it with a
new one and try again.
To Next Page
Loading...
