Sharp DX-C200 - Page 110

• You cannot load paper into the bypass tray while the machine is in Energy Saver mode. If the
machine is in Energy Saver mode, press the [Copy] key to recover from Energy Saver mode.
1. Insert the top edge of the paper into the machine.
CES134
2. Adjust the paper guides to the paper size.
CES135
3. Support the paper with both hands, and insert it carefully until it stops.
CES136
After the paper is inserted until it stops, the paper will be automatically fed into the machine a little.
• After loading paper in the tray, specify the paper type and size using the control panel or the
printer driver.
2. Getting Started
108