Making Enlarged or Reduced Copies
This section describes how to specify the reduction or enlargement ratio for the current job.
Scaling
There are two ways to set the scaling ratio: using a preset ratio or manually specifying a
customized ratio.
• Preset ratio
50%, 71%, 82%, 93%, 122%, 141%, 200%, 400%
50%, 65%, 78%, 93%, 129%, 155%, 200%, 400%
• Custom ratio
25% to 400% in 1% increments.
Use this procedure to specify the reduction or enlargement ratio for the current job.
4. Using the Copier Function
158
To Next Page
Loading...
Need help?
General
