Sharp DX-C200 - Scanner Settings; Changing Scanner Settings

Scanner Settings
This section describes how to configure the scanner settings.
Changing Scanner Settings
The procedure for changing the file type setting is provided as an example.
1. Press the [Scanner] key.
CES175
2. Press the [ ][ ] keys.
CES168
3. Press the [ ][ ] keys to select [File Type], and then press the [OK] key.
4. Press the [ ][ ] keys to select [Multi-page] or [Single Page], and then press the [OK] key.
5. Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
Scanner Settings
255