Network Settings
This section describes the network settings.
Changing Network Settings
The procedure for changing the network speed is provided as an example.
1. Press the [User Tools] key.
2. Press the [ ][ ] keys to select [Network Settings], and then press the [OK] key.
3. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
4. Press the [ ][ ] keys to select [Ethernet], and then press the [OK] key.
5. Press the [ ][ ] keys to select [Set Ethernet Speed], and then press the [OK] key.
6. Press the [ ][ ] keys to select the network speed, and then press the [OK] key.
7. Press the [User Tools] key to return to the initial screen.
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• You can press the [Escape] key to exit to the previous level of the menu tree.
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
Network Setting Parameters
This section describes the network setting parameters.
Ethernet
• MAC Address
Network Settings
279
To Next Page
Loading...
Need help?
General
