Sharp DX-C200 User Manual

Toner Saving
Item Description
Toner Saving Enable this setting to print using a reduced amount of toner when printing
out copies.
Configuring the I/O Timeout Settings
Click the [I/O Timeout] tab on the system settings page to configure the I/O timeout settings.
I/O Timeout
Item Description
Fixed USB Port Specifies whether the same printer/LAN-Fax driver can be used for multiple
machines or not under USB connection.
If this setting is enabled, the same printer/LAN-Fax driver you have
installed in your computer can be used with any machine other than the one
originally used for installation, if the machine is of the same model.
If disabled, you must install the printer/LAN-Fax driver separately for
individual machines, because the machine other than the original will be
recognized as a new device upon USB connection.
Locked Print Timeout
(seconds)
Specifies how many seconds the machine holds a new Locked Print file,
when the machine cannot store any more Locked Print files (0 to 300
seconds). Within this time, you can print or delete the new Locked Print file.
You can also print or delete an existing Locked Print file so that the new
Locked Print file can be stored in the machine.
Configuring the Black-and-White Print Priority Settings
Click the [B&W Print Priority] tab on the system settings page to configure the black-and-white print
priority settings.
Configuring the System Settings
319

Sharp DX-C200 Specifications

General

Brand	Sharp
Model	DX-C200
Category	Printer
Language	English