Administrator Settings
This section describes administrator settings.
Changing Administrator Settings
The procedure for changing the start-up mode after power-on is provided as an example.
1. Press the [User Tools] key.
2. Press the [ ][ ] keys to select [Admin. Tools], and then press the [OK] key.
3. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
4. Press the [ ][ ] keys to select [Function Priority], and then press the [OK] key.
5. Press the [ ][ ] keys to select the desired mode, and then press the [OK] key.
6. Press the [User Tools] key to return to the initial screen.
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• You can press the [Escape] key to exit to the previous level of the menu tree.
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
Administrator Setting Parameters
This section describes administrator setting parameters.
Set Date/Time
Sets the date and time of the machine’s internal clock.
• Set Date
Administrator Settings
291
To Next Page
Loading...
Need help?
General
