Printer Feature Settings
This section describes the printer feature settings.
Changing Printer Feature Settings
The procedure for changing the setting for duplex printing is described as an example.
1. Press the [User Tools] key.
2. Press the [ ][ ] keys to select [Printer Features], and then press the [OK] key.
3. Press the [ ][ ] keys to select [System], and then press the [OK] key.
4. Press the [ ][ ] keys to select [Duplex], and then press the [OK] key.
5. Press the [ ][ ] keys to select [None], [Long Edge Bind], or [Short Edge Bind], and then
press the [OK] key.
6. Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
Printer Feature Setting Parameters
This section describes the printer feature setting parameters.
List/Test Print
Prints lists showing configurations on the machine.
The lists will be printed using the tray set for [Printer] under [Paper Tray Priority] in system settings on
A4 or Letter size paper.
• Config. Page
Prints general information and the current configurations of the machine.
7. Configuring the Machine Using the Control Panel
296
To Next Page
Loading...
