Sharp DX-C200 - Copy Settings; Changing Copy Settings

Copy Settings
This section describes how to configure the copy settings.
Changing Copy Settings
The procedure for changing the sort copy setting is provided as an example.
1. Press the [Copy] key.
CES174
2. Press the [ ][ ] keys.
CES168
3. Press the [ ][ ] keys to select [Sort], and then press the [OK] key.
4. Press the [ ][ ] keys to select [On] or [Off], and then press the [OK] key.
5. Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
Copy Settings
249