• For details about supported types of paper, see p.82 "Paper and Other Media".
• For details about specifying the paper type and size, see p.114 "Specifying Paper Type and
Paper Size".
Loading Envelopes
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Before printing on envelopes, make sure to lower the fusing unit levers inside the front cover to
avoid envelopes coming out creased. Also, pull up the levers back to their original positions after
printing. Leaving the levers lowered can cause print quality problems when printing on paper other
than envelopes.
• Since the temperature around the guide is high, wait for it to cool before touching the fusing unit
levers.
Lowering the fusing unit levers
1. Pull the opening lever on the front cover, and then carefully lower the front cover.
To Next Page
Loading...
Need help?
General
