Sharp DX-C200 - Fax Transmission Settings; Changing Fax Transmission Settings

Fax Transmission Settings
This section describes how to configure the fax transmission settings.
Changing Fax Transmission Settings
The procedure for setting the resolution for scanning the original is provided as an example.
1. Press the [Facsimile] key.
CES176
2. Press the [ ][ ] keys.
CES168
3. Press the [ ][ ] keys to select [Resolution], and then press the [OK] key.
4. Press the [ ][ ] keys to select the desired resolution, and then press the [OK] key.
5. Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
7. Configuring the Machine Using the Control Panel
258