Sharp DX-C200 - Page 114

6. Set the envelopes in Tray 1 with the printing side facing up.
CER111
Make sure envelopes are not stacked higher than the upper limit (lower line) mark inside the tray.
CER050
7. Carefully push Tray 1 straight into the machine.
CER051
To avoid paper jams, make sure the tray is securely inserted.
• Be sure to load envelopes so that their flaps are on the right. If you do not, the envelopes will
become creased.
• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and
then rotate the print object by 180 degrees using the printer driver before printing. For details, see
the printer driver Help.
2. Getting Started
112