Sharp DX-C200 - Page 123

2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
CES070
3. Lower the ADF.
Hold down the ADF with your hands when using thick, folded, or bound originals and the ADF
cannot be lowered completely.
Placing originals in the Auto Document Feeder
By using the ADF, you can scan multiple pages at once.
• Do not place different size originals in the ADF at once.
• Straighten curls in the originals before placing them in the ADF.
• To prevent multiple sheets from being fed at once, fan the pages of your original before placing
them in the ADF.
• Place the original squarely.
1. Adjust the guides according to the size of the original.
CES108
Placing Originals
121