For each user, you can specify which functions are available upon authentication. A maximum of 30
users can be registered.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Restrict Available Functions].
3. Enter the administrator password if required.
4. Click [Apply].
5. Under "Available Functions", select [Restrict] for the functions you want to restrict, and
then click [Apply].
Select [Do not Restrict] for the functions you do not want to restrict.
The user restriction setting is enabled for the selected function. Proceed to the following steps to
register users.
6. Click [Available Functions per User].
A list of currently registered user entries appears.
2. Getting Started
126
To Next Page
Loading...
