9. Close the Web browser.
• For details about using Web Image Monitor, see p.301 "Using Web Image Monitor".
Deleting user entries
This section describes how to delete user entries.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Restrict Available Functions].
3. Enter the administrator password if required.
4. Click [Apply].
5. Click [Available Functions per User].
A list of currently registered user entries appears.
6. Select the entry to delete, and then click [Delete].
7. Confirm that the entry you have selected is the entry that you want to delete.
8. Click [Apply].
9. Close the Web browser.
• For details about using Web Image Monitor, see p.301 "Using Web Image Monitor".
2. Getting Started
128
To Next Page
Loading...
