Message Causes Solutions
Indep.Sply.Toner: X
A non-supported print cartridge
is installed for the indicated
color.
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Internal Misfeed
Paper has been jammed in the
machine.
Remove the jammed paper. See p.354
"Removing Printing Jams".
Memory Almost Full
Memory has almost reached
capacity during sort copy.
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
Memory Overflow
• The data is too large or
complex to print.
• If you try to print a Locked
Print file stored in the
machine with the printer
driver's [Gradation:] set to
[Fine] in the [Print Quality]
tab, printing may be
canceled depending on
the machine's current
memory usage.
• When performing printing
on Legal size paper under
certain print quality setting,
print data becomes large
and the job may be
canceled.
• Select [600 × 600 1bit] in
[Resolution] under [Printer Features]
to reduce the size of data. See p.296
"Printer Feature Settings".
• Print or delete other Locked Print files
in the machine, and then print the
Locked Print file that the machine
failed to print. Alternately, resend the
Locked Print file to the machine with
[Gradation:] set to [Speed] or
[Standard], and then print the Locked
Print file.
• If using the PCL printer driver, set
[Gradation:] in [Print Quality] to
[Speed] or [Standard]. If using the
PostScript 3 printer driver, set [Print
Quality:] in [Printer Features] to
[Standard] or [High Quality].
Error and Status Messages on the Screen
383
To Next Page
Loading...
Need help?
General
