Sharp DX-C200 - Page 398

• Make sure the transfer unit is installed. If the transfer unit is not installed, install it before turning on
the power.
• Comply with the waste toner bottle Recycling Program, whereby used waste toner bottles are
collected for processing. For details, ask your sales or service representative.
• Before removing the waste toner bottle from the machine, spread paper or similar material around
the area to keep toner from dirtying your workspace.
1. Pull the opening lever on the front cover, and then carefully lower the front cover.
CES141
2. Slide both levers on the front cover forward.
CER014
3. Holding the tabs on both ends of the transfer unit, tilt it backwards then lift it up.
CER015
9. Troubleshooting
396