Sharp DX-C200 - Page 93

• Fan envelopes, and then align their edges before loading.
CER108
• When fanning envelopes, make sure they are not stuck together. If they are stuck together,
separate them.
• When fanning envelopes, make sure the envelope flaps are not stuck together. If they are stuck
together, separate them.
• Before loading envelopes, flatten them out so that their curl does not exceed that shown in the
illustration below.
CER109
• If the curl is severe, flatten out the envelopes using your fingers, as shown in the illustration below.
CER110
Paper and Other Media
91