36
ADVANCED TRANSMISSION METHODS
USING THE POLLING FUNCTION
When used in conjunction with the timer transmission function (page 33), only one polling job can be stored.
1
In Fax mode, press the [SPECIAL
FUNCTION] key.
When the [SPECIAL
FUNCTION] key is pressed, the
special function menu appears.
(To select fax mode, see step 1
on page 17.)
2
Select "SENDING OPTIONS" with the
[ ] or [ ] key.
3
Press the [OK] key.
4
Select "POLLING" with the [ ] or [ ]
key.
5
Press the [OK] key.
6
Enter the fax number of the other
machine with the numeric keys, press
a Rapid key, or specify a Speed Dial
number (a group key cannot be used).
To clear a mistake when
entering a full number with the
numeric keys, press the [C] key
to clear one digit at a time.
A destination selected with a Rapid key or Speed Dial
number is indicated by an icon and a number. To clear
an entry, press the [C] key.
7
Press the [OK] key.
8
Press the [START] key.
"Polling reservation has been
set." appears in the screen.
After communicating with the
other machine, your machine
prints the received fax.
If the other machine is using polling security (see "Restricting polling access (polling security)" on page 40), your
fax number (sender's number) must be programmed in the system settings (see "OWN PASSCODE SET" on
page 101) and your number must also be programmed in the other machine.
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
