63
TRANSMISSION USING F-CODES
4
USING THE F-CODE RELAY BROADCAST FUNCTION
(your machine is the relay machine)
When a document is received from a relay request machine, the F-code relay broadcast function transmits the
document to the end receiving machines using a memory box only if the sub-address and passcode sent by the
relay request machine are correct.
To create, edit, or delete an F-code relay group (box), see pages 78, 80 and 83.
A document received from a relay request machine is initially stored in the box of your machine. Your machine (the
relay machine) also prints the document, thus the document is first stored as a print job and then as transmission
jobs to each of the programmed end receiving machines. The document data is automatically cleared after
transmission to all end receiving machines is completed.
Transmission to the end receiving machines cannot be stopped or cancelled.
USING THE F-CODE RELAY REQUEST FUNCTION
(your machine requests a relay broadcast)
Ask the operator of the other F-code machine (the relay machine) to create an F-code relay group (box) that
contains the end receiving machines to which you wish to send a fax, and ask for the sub-address (SUB) and
passcode (SID) of that box.
When you dial the relay machine to send the fax, enter the sub-address and passcode after the fax number. The fax
will be stored in the relay machine's memory box, and the relay machine will call each of the programmed end
receiving machines and relay the fax to those machines. (If a passcode (SID) is not programmed in the box , enter
only the sub-address when dialling.)
To dial the relay machine, use the same procedure as in "F-CODE TRANSMISSION (F-CODE CONFIDENTIAL
TRANSMISSION)" (page 59).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
