Sharp MX-M202D User Manual

94
PROBLEMS AND SOLUTIONS
If you experience a problem with the fax function, first check the following table.
This section describes problems related to the fax function. For problems related to general operation of the
machine, see "TROUBLESHOOTING" in the Operation Guide for the machine.
Problem Check Solution Page
The machine does not
operate.
Is the machine power
switch turned on?
Turn the power switch ON. "Power switch" on page 4
Does the display show an
error message?
Clear the error as
instructed by the
message.
"WHEN AN ALARM
SOUNDS AND A
WARNING MESSAGE IS
DISPLAYED" on page 92
Dialling is not possible. Is the correct dial mode
set for your line?
Check your line and set
the correct dial mode.
"DIAL MODE" on page
100
Is the telephone line
properly connected?
Check the connections. "Line connection" on page
4
Is the machine power
switch turned on?
Turn the power switch ON. "Power switch" on page 4
Is the machine in fax
mode?
Press the [FAX] key to set
the machine to fax mode.
"BASIC PROCEDURE
FOR SENDING FAXES"
on page 17
Cannot send a fax. Does the receiving fax
machine have paper?
Check with the operator of
the receiving machine.
–
Does the receiving
machine support G3
transmission?
Are the sub-address and
passcode correct? (When
using F-code
transmission)
Is the receiving machine
ready to receive?
Are you using a
transmittable original size?
Check the transmittable
sizes.
"ORIGINALS THAT CAN
BE FAXED" on page 11
Was the original size
detected correctly?
Check size of the original. "CHECKING THE SIZE
OF A PLACED
ORIGINAL" on page 13
The message "Reading
cancelled. Please retry
sending operation."
appears.
If you attempt
transmission while the
message "Warming-up."
appears, the transmission
may not take place
correctly. Repeat the
transmission.
–
The transmitted image
prints out blank at the
receiving side.
Was the original placed so
that the correct side is
scanned?
Make sure the original is
placed so that the correct
side is scanned.
"PLACING THE
ORIGINAL" on page 12
If the receiving machine is
using thermal paper, was
the thermal paper loaded
with the wrong side out?
Check with the operator of
the receiving machine.
–

Sharp MX-M202D Specifications

General

Print technology	Laser
Maximum resolution	600 x 600 DPI
Economical printing	Yes
Print speed (black, normal quality, A4/US Letter)	20 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Time to first copy (black, normal)	7.2 s
Scanner type	-
Maximum scan area	Legal (216 x 356) mm
Maximum scan resolution	- DPI
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Maximum duty cycle	- pages per month
Page description languages	PCL 6, PostScript 3
Total input capacity	- sheets
Maximum input capacity	1100 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Plain paper, Transparencies
Paper tray media weight	56 - 90 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A6
Maximum ISO A-series paper size	A4
Display	LED
Product color	White
Market positioning	Business
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
Wi-Fi	No
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	1200 W
Windows operating systems supported	Windows 2000, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64
Bundled software	Scanner utility software

Weight and Dimensions

Depth	573 mm
Width	591 mm
Height	595 mm