82
PROGRAMMING
● Editing an F-code confidential box
11
Select the name of the F-code
confidential box that you wish to edit
with the [ ] or [ ] key.
If not all letters of the box name appear, press the
key to display all letters. Press the key once again
to return to the original screen.
12
Press the [OK] key.
13
Enter the print passcode (4 digits)
with the numeric keys.
Enter the correct print passcode that was programmed
when the confidential box was programmed.
14
Press the [OK] key.
15
Edit the name of the F-code
confidential box (see "ENTERING
CHARACTERS" on page 86).
• See step 9 on page 79.
• If you do not wish to edit the name, go to the
next step.
16
Press the [OK] key.
17
Edit the sub-address (maximum 20
digits) with the numeric keys.
• See steps 3 and 4 on page 69.
• If you do not need to edit the sub-address,
press the [OK] key and go to the next step.
18
Edit the passcode (maximum 20
digits) with the numeric keys.
• See steps 5 and 6 on page 69.
• If you do not need to edit the passcode, press
the [OK] key and go to the next step.
19
Edit the print passcode (4 digits) with
the numeric keys.
• See steps 13 and 14 on page 79.
• If you do not need to edit the print passcode,
press the [OK] key.
● Deleting an F-code confidential box
11
Select the name of the F-code
confidential box that you wish to
delete with the [ ] or [ ] key.
If not all letters of the box name appear, press the
key to display all letters. Press the key once again
to return to the original screen.
12
Press the [OK] key.
13
Enter the print passcode (4 digits)
with the numeric keys.
Enter the correct print passcode that was programmed
when the confidential box was programmed.
14
Press the [OK] key.
15
Select "DELETE" with the [ ] or [ ]
key.
16
Press the [OK] key.
You will return to the screen of step 11. If you
wish to delete another box, repeat steps 11
through 14. To exit, press the [BACK] key.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
