89
PROGRAMMING
6
Entering special characters
Special characters are entered with the Rapid key
overlay opened.
1
Press the [SP] key.
2
Select the special character that you
wish to enter with the [ ][ ][ ][ ]
keys.
To move to the next page, move the cursor to the
bottom line and press the [ ] key. To move back to
the previous page, move the cursor to the top line and
press the [ ] key. You can also change pages by
pressing the [ ] key when the cursor is at the right
end of the bottom line, or the [ ] key when the cursor
is at the left end of the top line.
3
Press the [OK] key.
The special character selected with the cursor is
entered and you return to the character entry screen.
If the Rapid key overlay is closed while a
special character is being selected, the
special character currently selected with the
cursor is entered.
To Next Page
Loading...
