1-117
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional. However, some models include certain peripheral devices as standard
equipment.
(As of October, 2016)
PERIPHERAL DEVICES
Product name
Product
number
Description
Large capacity tray MX-LC12 Additional tray. A maximum of 3500 sheets of paper can be
placed.
MX-LCX3 N Additional tray. A maximum of 3000 sheets of paper can be
placed.
Large capacity trays MX-LC13 N Additional tray. A maximum of 5000 sheets of paper can be
placed.
Paper pass module MX-RB16 This unit is required to facilitate connection of large capacity trays.
Multi bypass tray MX-MFX1 Additional tray. A maximum of 100 sheets of paper can be
placed. Install this tray in the machine.
MX-MF11 Additional tray. A maximum of 500 sheets of paper can be
placed. Install this tray on the large capacity trays.
Finisher (50-sheet stapling) MX-FN24 Output device that enables the use of the staple function and
offset function. A maximum of 50 sheets of paper can be stapled.
Finisher (100-sheet stapling) MX-FN21 Output device that enables the use of the staple function and
offset function. A maximum of 100 sheets of paper can be stapled.
Saddle stitch finisher
(50-sheet stapling)
MX-FN25 Output device that enables use of the staple function, offset
function and pamphlet copy function. A maximum of 50 sheets of
paper can be stapled.
Saddle stitch finisher
(100-sheet stapling)
MX-FN22 Output device that enables use of the staple function, offset
function and pamphlet copy function. A maximum of 100 sheets of
paper can be stapled.
Punch module MX-PNX4B This unit punches holes in copies and other output. A finisher
(50-sheet stapling) or saddle stitch finisher (50-sheet stapling) is
required.
MX-PN13B This unit punches holes in copies and other output. A finisher
(100-sheet stapling) or saddle stitch finisher (100-sheet stapling)
is required.
Trimming module MX-TM10 This unit trims the excess portions of saddle-stitched sheets. A
saddle stitch finisher (100-sheet stapling) is required.
Folding unit MX-FD10 This unit folds and outputs paper. A finisher (100-sheet stapling)
or saddle stitch finisher (100-sheet stapling) is required.
Inserter MX-CF11 This unit inserts covers and insertion sheets. This unit can also
feed paper to a finisher (100-sheet stapling) or saddle stitch
finisher (100-sheet stapling) for finishing.
To Next Page
Loading...
