Sharp MX-M905 User Manual

4-38
FACSIMILE►BASIC TRANSMISSION METHODS
RESENDING TO UNSUCCESSFUL BROADCAST
TRANSMISSION DESTINATIONS
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
destinations failed, resend the fax to those destinations.
5
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED
(page 4-28)".
1
Tap the job status display, and tapping
the [Fax] tab.
2
Tap the [Complete] key.
Job Queue
Complete
Internet FaxFaxScan
Job
Address
Set Time
StatusPages
Print
Check Details of
Selected Job
Stop/Delete
Enter Multi
Selection Mode
Display Only
Own Job
Check Confidential
Reception Data
Back
Waiting
000110:45 07/07Broadcast001

Sharp MX-M905 Specifications

General

Category	All in One Printer
Functions	Print, Copy, Scan, Fax
Print Speed (Black & White)	90 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed (Black & White)	90 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Maximum Paper Capacity	6, 600 sheets
Maximum Paper Size	A3
Duplex Printing	Yes
Paper Size	A3, A4, A5
Connectivity	USB, Ethernet
Network Connectivity	Ethernet
Display	10.1-inch Touchscreen
Scanner Type	Flatbed, ADF
Operating System Compatibility	Windows, Linux