Sharp MX-M905

1-150
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
INSERTER
Covers and insertion sheets to be inserted into printed sheets can be loaded.
Using the manual finishing function, you can directly feed paper into the finisher (100-sheet stapling) or saddle stitch
finisher (100-sheet stapling) to staple, punch or fold the paper.
PART NAMES
(1) Paper insertion unit cover
Open this cover to remove a paper misfeed.
(2) Paper guide
Push the lock lever to adjust to the paper size.
(3) Paper tray (upper/lower)
Insert paper or printed paper. A maximum of 200 sheets
of paper can be loaded into each tray.
(4) Bypass tray extension
Extend this when loading paper larger than 8-1/2" × 11"R
or A4R.
(5) Paper transfer unit front cover
Open this cover to remove a paper misfeed.
(6) Paper transfer unit rear cover
Open this cover to remove a paper misfeed.
(7) Cover
Open this cover to remove a paper misfeed.
For detailed information on paper that can be loaded into the inserter, see the "SPECIFICATIONS" in the "Start Guide".
(5)
(6)
(7)
(4)
(3)
(2)
(1)