1-123
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
FINISHER (100-SHEET STAPLING)
This includes the offset function that outputs sorted paper while staggering each set of paper and the staple sort function
that staples each set of prints.
Installing an optional hole punch module allows you to punch holes in printed paper.
PART NAMES
(1) Staple compiler
This temporarily stacks paper to be stapled.
(2) Output tray
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for printing on
large-size paper (12" × 18", 11" × 17", 8-1/2" × 14",
8-1/2" × 13", A3W, A3 and B4 sizes).
(3) Top cover
Open this cover to remove a paper misfeed.
(4) Front cover
Open this cover to replace the staple cartridge or remove
a staple jam.
• Do not place heavy objects on the finisher or press down on the finisher (100-sheet stapling).
• Exercise caution when you turn on the power and when printing is taking place, as the tray may move up and down.
• A finisher (100-sheet stapling) cannot be installed simultaneously with a saddle stitch finisher.
To Next Page
Loading...
