2-20
COPIERâ–ºBASIC PROCEDURE FOR MAKING COPIES
CHANGING THE EXPOSURE AND ORIGINAL
IMAGE TYPE
AUTOMATIC ADJUSTMENT OF EXPOSURE AND
ORIGINAL TYPE
Automatic exposure adjustment operates by default to automatically adjust the exposure level and original type as
appropriate for the original being copied. ([Auto] is displayed.)
This function automatically adjusts the image during copying to obtain the most suitable copy.
MANUAL ADJUSTMENT OF EXPOSURE AND
ORIGINAL TYPE
This section explains how to select the original type depending on the original to be copied or manually adjust the
exposure.
• To change the default exposure:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Exposure Type].
• To adjust the exposure level when [Auto] is used for the copy exposure:
In "Settings (administrator)", select [System Settings] → [Image Quality Adjustment] → [Copy Image Quality] → [Density
Adjustment when [Auto] is selected for Exposure].
To change the default exposure:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Exposure Type].
1
Tap the [Exposure] key.
â–º COPY MODE (page 2-3)
2
Tap or slide the slider to
adjust the copy exposure.
After the adjustment, tap .
This completes the procedure in easy mode.
Start
Original
8½x11
Detail
Exposure
CA
Preview
Copies
Original Card Shot
OffAuto
Start
CA
Preview
Copies
Exposure
Auto Manual
Lighten Darken
To Next Page
Loading...
Need help?
General
