2-33
COPIER►BASIC PROCEDURE FOR MAKING COPIES
5
Tap a key ( ) for storing a
custom original size.
Tap a key that does not show a size.
To modify or delete a previously stored key:
Tap the key that you want to modify or delete. The following screen will appear.
• To modify the key, tap the [Modify] key and go to the next step.
• To delete the key, tap the [Delete] key. Make sure that the original size has been cleared and tap the key.
6
Specify the original size.
Tap the areas displaying width and height sizes respectively,
and enter the sizes using the numeric keys.
It is convenient to use to finely adjust the entered size.
7
Tap the [Execute] key
After the settings are completed, tap the key, and check that the key of the size stored on the original screen is
added properly. After you have checked it, tap .
To cancel the operation:
Tap the [CA] key.
Proof Copy
CAPreview
Start
Store/Delete
Select the size key to store/delete
the custom original size.
Others
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
1
No. of copies
Original
4
8½x11
3
8½x14
11x17
Proof Copy
CAPreview
Start
Store/Delete
Select the size key to store/delete
the custom original size.
Others
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
X420 Y297
A custom size has already been stored
in this location.
Delete ModifyCancel
Original
3
8½x14
8½x11
11x174
Preview
No. of copies
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Size Input
Enter Size to Register.
Others
11
17
( 1~11 5/8 )
inch
( 1~17 )
inch
X
Y
Execute
CA
Original
Proof Copy
Start
4
8½x11
11x17
3
8½x14
1
To Next Page
Loading...
