2-48
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Trimmer Setting
4
Tap the [Left Binding/Tablet] or [Right
Binding] key to select an original and
configure the cover sheet setting.
After the settings are completed, tap .
• The original will be scanned from the innermost side when folded.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Divide],
[Continue], or [Cancel] key.
[Divide]: Divides the pages into sets that can be stapled and sorts them. You cannot use this function if the
cover settings are selected.
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
To cancel the Saddle Stitch:
Tap the [Off] key.
1
When Saddle Stitch is selected, tap the
[Trimmer Setting] key.
2
Tap the [On] key, and specify the
trimming width.
Tap the numeric value display field of the trimming width,
and enter the allowable range using the numeric keys.
Otherwise, tap . After the settings are completed, tap
.
To cancel the Trimmer Setting:
Tap the [Off] key.
Others
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
Proof Copy
CAPreview
Start
4
3
No. of copies
Booklet
Select Output Binding Edge.
Select Original Type.
1-Sided
2-Sided
Booklet
2-Sided
Tablet
Cover Setting
Off
Left Binding/
Tablet
Right Binding
8½x11
8½x14
11x17
Off
1 Staple
2 Staples
Trimmer
Setting
Original
Others
Upper Tray
Lower Tray
Output Tray
Output
Change Size/Direction.
Original
Put Multiple Pages in A Page
N-Up
Shift Position to Have Margin
Margin Shift
Erase Shadow Around
Erase
Proof Copy
CAPreview
Start
Offset
No. of copies
Separator Page
Sort/Group Staple Punch Fold
3
4
11x17
8½x14
8½x11
Saddle
Stitch
Middle
Tray
Others
Output
Erase Shadow Around
Erase
Proof Copy
CAPreview
Start
No. of copies
Full Bleed Copy
Trimmer Setting
Set Trimming Width.
( 2.0~20.0 )
mm
On
Off
20
3
4
11x17
8½x14
8½x11
To Next Page
Loading...
