Sharp MX-M905

2-136
COPIER►CONVENIENT COPY FUNCTIONS
2
As necessary, specify the required functions such as "Exposure" and "Copy
Ratio".
To cancel all settings:
Tap the [CA] key.
3
Set the number of copies (number of
sets) using the numeric keys.
Up to 9999 copies (sets) can be set.
If an incorrect number of copies is set
Tap the [C] key, and enter the correct number.
4
Tap the [Proof Copy] key.
Make only one set of copies.
5
Check the copy result. If no problem is
found, tap the [Start Print] key.
As necessary, change the settings and repeat proof copying
until you are satisfied with the copy result.
Proof Copy
CAPreview
Start
Paper Select
Auto
Exposure
Auto
Original
2-Sided Copy
1-Sided→1-Sided
Copy Ratio
100%
Output
Off
N-Up
Others
Send and Print
Scan Original Again
Without change Settings
Store Data in Folder
File
Store Data Temporarily
Quick File
1
No. of copies
Register Current Settings
Program Registration
Plain 1
21
3
4
5
Auto 8½x11
8½x11
8½x11
8½x11
11x17
8½x14
8½x11
No. of copies
Proof Copy
CAPreview
Start
Paper Select
Auto
Exposure
Auto
Original
2-Sided Copy
1-Sided→1-Sided
Copy Ratio
100%
Output
Off
N-Up
Others
Send and Print
Scan Original Again
Without change Settings
Store Data in Folder
File
Store Data Temporarily
Quick File
1
No. of copies
Register Current Settings
Program Registration
Plain 1
21
3
4
5
Auto 8½x11
8½x11
8½x11
8½x11
11x17
8½x14
8½x11
No. of copies
Others
No. of copies
Register Current Settings
Program Registration
Adjust Print Position
Press [Start Print] to continue.
To make a proof copy again,
press [Proof Copy].
Proof Copy
CA
Start Print
Paper Select
Auto
Exposure
Auto
Original
Auto 8½x11
2-Sided Copy
1-Sided→1-Sided
Copy Ratio
100%
Output
Off
21
3
4
8½x11
5
8½x11
8½x11
11x17
8½x14
8½x11
N-Up