Sharp MX-M905 User Manual

1-4
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Optional
(1) Finisher (100-sheet stapling)
This staples and outputs paper.
► FINISHER (100-SHEET STAPLING)
(page 1-123)
(2) Saddle stitch finisher (100-sheet stapling)
This staples and folds paper.
► SADDLE STITCH FINISHER (100-SHEET
STAPLING) (page 1-136)
(3) Status indicator
The status of the machine is indicated.
► STATUS INDICATORS
(page 1-151)
(4) Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" × 11"R or A4R,
pull out the extension guide.
► LOADING PAPER INTO THE BYPASS TRAY
(page
1-83)
(5) Saddle stitch finisher (50-sheet stapling)
This staples and folds paper.
► SADDLE STITCH FINISHER (50-SHEET
STAPLING) (page 1-128)
(6) Finisher (50-sheet stapling)
This staples and outputs paper.
► FINISHER (50-SHEET STAPLING)
(page 1-119)
(7) Trimming module
This trims the excess of saddle-stitched output.
(8) Punch module
This punches and outputs paper.
(9) Curl correction unit
This punches and outputs paper.
(10) Tray 5 (MX-LC12)
Store paper in this tray. Up to 3500 sheets can be stored.
► LOADING PAPER IN THE LARGE CAPACITY
TRAY (page 1-73)
(11) Tray 5 (MX-LCX3 N)
Store paper in this tray. Up to 3000 sheets can be stored.
► LOADING PAPER IN THE LARGE CAPACITY
TRAY (page 1-73)
(6) (7) (8) (9) (10) (11)(5)
(3)(1) (2) (4)

Sharp MX-M905 Specifications

General

Brand	Sharp
Model	MX-M905
Category	All in One Printer
Language	English