7-11
MANUAL FINISHING►OPERATION OF MANUAL FINISHING
STAPLE FUNCTION
When a finisher (100-sheet stapling) is installed, you can staple loaded papers into a sheaf. (Staple function)
When a saddle stitch
finisher (100-sheet stapling) is installed, you can staple papers in two places on the centerline and
fold them before being output. (Saddle stitch function)
Selecting staple function
Tap your desired staple key in the [Staple].
The output tray is automatically selected based on the selected staple key.
Staple Saddle Stitch
• You can use the saddle stitch function for size 8-1/2 " × 11"R to 12" × 18" (A4R to A3W) papers.
• The saddle stitch function cannot be used with other manual finishing functions.
• If you load only one sheet of paper while the staple function is ON, the staple function is temporarily turned OFF and the
sheet is not stapled.
To cancel the staple function:
Tap the [Off] key.
8½x11
8½x11
Upper Tray
Output Tray Inserter
Staple
Off
1 Staple
at Back
Saddle
Fold
Half Fold
C-Fold
1 Staple
at Front
2 Staples
Saddle
Stitch
Off
Off
Accord-
ion Fold
Copies/Pages
Type and Size
Double
Fold
Z-Fold
Detail
Punch Fold
Middle Tray
Lower Tray
Start
CA
Upper Tray
Lower Tray
Plain 1
Plain 1
2 Hole
Punch
To Next Page
Loading...
