8-8
SYSTEM SETTINGS►SETTING MODE LIST
*1 Appears when [LDAP] is set in "Authentication Settings".
*2 Appears when "
Settings (administrator)
" - [Sharp OSA Settings]
→
[External Accounting Application Settings]
→
[Set Authentication Server (Server 1)] is enabled.
*3 This setting is configured in setting mode on the web page.
*4 This setting is configured in setting mode on the machine.
Billing Code Display Name Setting No Yes
• Main Code Display Name Default No Yes
• Sub Code Display Name Default No Yes
X Main Code List – No Yes
X Sub Code List – No Yes
● Card Setting (page 8-82) No Yes
X Card Area Setting (page 8-82) No Yes
Check System Code only in FeliCa User Area mode Disabled No Yes
Check Facility Code in HID mode Disabled No Yes
Facility Code – No Yes
Importing from the setup file – No Yes
Card Scan Test Disabled No Yes
X Card Type / Card Reader Settings (page 8-82) No Yes
Card Type / Card Reader 200 No Yes
X Card Reader Device Registration*
4
– No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
