Sharp MX-M905

To Next Page

To Previous Page

8-12

SYSTEM SETTINGS►SETTING MODE LIST

*1 When a finisher/saddle stitch finisher is installed

*2 When a finisher/saddle stitch finisher is installed and a punch module is installed

*3 When a saddle stitch finisher is installed

*4 When a saddle stitch finisher (100-sheet stapling) is installed

• Fold Multiple Sheets Together*

Disabled Yes Yes

 Quick File Disabled Yes Yes

X PCL Settings Yes Yes

 PCL Symbol Set Setting PC-8 Yes Yes

 PCL Font Setting Internal Font, 0: Courier Yes Yes

 PCL Line Feed Code 0.CR=CR; LF=LF; FF=FF Yes Yes

 Wide A4 Disabled Yes Yes

X PostScript Settings Yes Yes

 Screen Settings Standard Yes Yes

 Print PS Errors Disabled Yes Yes

 Binary Processing Disabled Yes Yes

X OOXML Settings Yes Yes

 Print What Selected Sheet Yes Yes

X Print Release Settings For information about each of the

print release settings, see "Print

Release Settings Guide".

No Yes

X E-mail Print Settings No Yes

 E-mail Print Disabled No Yes

 POP3 Server – No Yes

 Port Number 110 No Yes

 POP Authentication Disabled No Yes

 User Name – No Yes

 Password – No Yes

• Change Password Disabled No Yes

 Check Interval 5 minutes No Yes

 Enable SSL Disabled No Yes

 Connection Test – No Yes

X Direct Print Settings (FTP) No Yes

X Direct Print Settings (Network Folder) – No Yes

X Print Setting from PC/Mobile Terminal No Yes

 FTP Print Enabled No Yes

 Port Number 21 No Yes

 Use Banner Disabled No Yes

Setup Items Factory default setting U A

Other manuals for Sharp MX-M905