Sharp MX-M905 - Page 752

8-17
SYSTEM SETTINGS►SETTING MODE LIST
Internet Fax Settings
 Administration Settings No Yes
• Advanced Settings No Yes
- Disable Selection of Reply-to. Disabled No Yes
• File Naming No Yes
- Unit Serial Number Disabled No Yes
-Text Disabled No Yes
- Sender Name Enabled No Yes
- Date & Time Enabled No Yes
- Session Page Counter Disabled No Yes
- Unique Identifier Disabled No Yes
• Default Subject – No Yes
• Add Job Information Automatically to the Mail
Message Body
Enabled
No Yes
• Add a Footer Automatically to the Mail Message
Body
Disabled
No Yes
• Mail Footer Registration – No Yes
 Subject Name Settings – No Yes
 File Name Settings – No Yes
 Message Body Settings – No Yes
For fax settings, refer to "SETTING MODE FOR FAX
(page 8-181)".
Setup Items Factory default setting U A
● Internet Fax Settings (page 8-104)*
X Default Settings No Yes
 Resolution Setting No Yes
• Apply the Resolution Set when Stored Disabled No Yes
•(No item) 200x100dpi No Yes
•Half Tone Disabled No Yes
 Auto Wake Up Print Enabled No Yes
 Initial File Format Setting No Yes
• File Type TIFF-F No Yes
• Compression Mode MH (G3) No Yes
 Speaker Volume Setting No Yes
• Receive Signal Middle No Yes
• Communication Error Signal Middle No Yes
• Original Print on Transaction Report Print Out Error Report Only No Yes
Setup Items Factory default setting U A