Sharp MX-M905

To Next Page

To Previous Page

8-48

SYSTEM SETTINGS►SETTING MODE LIST

Image Quality Adjustment

U: General user; A: System administrator/Administrator

* This setting is configured in setting mode on the machine.

Setup Items Factory default setting U A

● Image Quality Adjustment (page 8-176)

X Collective Adjustment No Yes

 Fusing Cleaning Mode* – No Yes

 MC Cleaning Mode* – No Yes

 Black Letter/Black Line Width Adjustment 0 No Yes

 Black Streak Reduction Disabled No Yes

 Display warning message for black streaks detection. Disabled No Yes

X Copy Image Quality No Yes

 Quick Image Quality Adjustment 2 No Yes

 Gray Balance All 0 No Yes

 Density Adjustment when [Auto] is selected for

Exposure

Document Glass, Document

Feeder: 5 (Normal)

No Yes

 Sharpness 2 No Yes

 Image Quality Priority No Yes

•Auto 0 No Yes

• Text/Prtd.Photo 0 No Yes

X Print Image Quality No Yes

 Quick Image Quality Adjustment 2 No Yes

 Gray Balance All 0 No Yes

 Exposure Adjustment 3 (Normal) No Yes

 Line Thickness 5 No Yes

X Scan Image Quality No Yes

 RGB Adjust All 0 No Yes

 Sharpness 3 (Normal) No Yes

 Contrast 3 (Normal) No Yes

X Common Functions* – No Yes

 Auto Gray Calibration (for Copy) – No Yes

 Auto Gray Calibration (for Print) – No Yes

 Copy Calibration by Screen – No Yes

 Printer Calibration by Screen – No Yes

 Density Smoothing Adjustment Middle No Yes

Other manuals for Sharp MX-M905