8-69
SYSTEM SETTINGS►USER CONTROL
A Warning when Login Fails
If a login fails three times in succession, a warning is displayed and further login is disabled for five minutes. This
prevents an unauthorized person from attempting to guess a password. (The number of failed login attempts is retained
even if the power is turned off.)
Disabling of Printing by Invalid User
Printing by users whose information is not stored in the machine, such as printing without entering valid user information
in the printer driver or printing of a file on an FTP server in Setting mode (Web version), can be prohibited.
Allow Remote Scanner Using Before Login.
This setting specifies whether scanning can be performed by remote operation before a user has logged in.
Automatically print stored jobs after login
When retention is enabled in the printer driver and print data has been spooled to the machine, you can have the spooled
print data automatically print out when the user who enabled retention logs in.
Display Usage Status after Login
When user authentication is enabled, this setting specifies whether or not to display the page counts of a user when the
user logs in.
Login Name Display
When user authentication is enabled, select whether the login name is shown or asterisks are shown.
Include Job Status in user authentication
When user authentication is enabled, this setting specifies whether or not to include the job status in user authentication.
Disable display/change of other users' information in the job status
Prohibit display and changing of job information of other users in the job status.
Automatic Logout Setting
When user authentication is enabled, this setting specifies whether or not to enable automatic logout.
The time until logout can be specified up to 240 seconds in increments of 10 seconds.
Locking of the operation panel for five minutes can be canceled by selecting [User Control] in "Settings" → [Default Settings]
→ [Release the Lock on Machine Operation Panel].
Locking of the operation panel for five minutes can be canceled by selecting [User Control] in "Settings" → [Default Settings]
→ [Release the Lock on Machine Operation Panel].
Item Description
Display login name Show the login name.
Display Login Name with Asterisk " ".
Hide the login name with asterisks.
To Next Page
Loading...
